{"product_id":"universali-hidroizoliacija-unibase-ms-sf","title":"UniBase MS – Liquid Rubber Waterproofing Membrane, Grey\/Black, 1kg\/5.7kg","description":"\u003ch3\u003eLeaking flat roof, gutter or cracked terrace?\u003c\/h3\u003e\n\u003cp\u003ePandaCoat UniBase MS is a seamless, liquid-applied waterproofing membrane (liquid rubber) that stops damp, cracks and water damage on flat roofs, terraces, gutters and even old bituminous coatings – no need to strip the old layer first.\u003c\/p\u003e\n\u003ch3\u003eUniBase MS advantages\u003c\/h3\u003e\n\u003cp\u003e🔧 \u003cstrong\u003eStops leaks with one thick coat\u003c\/strong\u003e\u003cbr\u003eCures into a flexible, crack-bridging waterproofing membrane for roofs, terraces and gutters that won't shrink or split.\u003c\/p\u003e\n\u003cp\u003e🛠️ \u003cstrong\u003eUniversal, usually no primer needed\u003c\/strong\u003e\u003cbr\u003eApply directly to concrete, wood, metal or tile – no primer required (on old bitumen coatings, use Primer VL 2K first to prevent blistering). Just clean the surface, then brush or roller on.\u003c\/p\u003e\n\u003cp\u003e🌦️ \u003cstrong\u003eBuilt for the weather\u003c\/strong\u003e\u003cbr\u003eCures into a membrane that stretches over 3x without tearing, resists UV, heavy rain and temperatures from -40°C to +80°C. Apply 2–3 coats for a thicker, longer-lasting result.\u003c\/p\u003e\n\u003cp\u003e🏗️ \u003cstrong\u003eNot just for roofs\u003c\/strong\u003e\u003cbr\u003eAlso waterproofs wood, brick and masonry, and works as a damp-proof membrane under concrete floors, in basements and other below-ground spaces.\u003c\/p\u003e\n\u003cp\u003e💧 \u003cstrong\u003eCovers 1.1–1.3 L\/m² (1.5–1.8 kg\/m²)\u003c\/strong\u003e\u003cbr\u003eIsocyanate-free MS polymer lets trapped moisture escape through the membrane instead of causing blisters – manufactured in the EU to strict quality standards.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cp\u003eA single-component, liquid-applied waterproofing membrane based on MS polymer (silane-modified polymer, isocyanate-free) that cures with air moisture into a seamless coating resistant to standing water. \u003cstrong\u003e1 kg pack\u003c\/strong\u003e – solvent-based (SB) formula. \u003cstrong\u003e5.7 kg pack\u003c\/strong\u003e – solvent-free (SF) formula, odourless, suitable for indoor use.\u003c\/p\u003e\n\u003ch3\u003eWhere to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat roofs, terraces, green\/planted roofs, standing-water areas\u003c\/li\u003e\n\u003cli\u003eGutters and chimney base sealing\u003c\/li\u003e\n\u003cli\u003eShed and garage roofs\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam or polystyrene insulation\u003c\/li\u003e\n\u003cli\u003eNo-primer-needed surfaces: concrete, ceramic tile, metal\u003c\/li\u003e\n\u003cli\u003eOld bitumen coatings\/felt (use Primer VL 2K first, see below)\u003c\/li\u003e\n\u003cli\u003eAlso: outdoor timber, foundations, walls, basements (damp-proof membrane under flooring)\u003c\/li\u003e\n\u003cli\u003eWater tanks and reservoirs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cp\u003eThe surface must be free of dust, grease and debris; remove old flaking coatings. The surface doesn't need to be fully dry – per the technical data sheet, it can also be applied to a damp substrate.\u003c\/p\u003e\n\u003cp\u003eNo primer is needed on concrete, ceramic or metal. On old bitumen coatings, \u003cstrong\u003ePrimer VL 2K is required\u003c\/strong\u003e to prevent blistering.\u003c\/p\u003e\n\u003cp\u003eApply 2–3 thin coats or 1 thick coat, allowing 2–48 hours between coats. \u003cstrong\u003eCoverage: 1.1–1.3 L\/m² (1.5–1.8 kg\/m²)\u003c\/strong\u003e. Surface dry after approx. 1.5 hours (23°C\/50% RH), fully cured after 12–24 hours.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDensity: 1.40 g\/cm³\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -40°C to +80°C\u003c\/li\u003e\n\u003cli\u003eWater vapour permeability: 12.7 g\/m²\/day – the membrane lets moisture escape instead of forming blisters\u003c\/li\u003e\n\u003cli\u003eWatertight \/ resistant to standing water: 1 m water column \/ 24h (DIN EN 1928)\u003c\/li\u003e\n\u003cli\u003eCrack bridging: Class A5 (highest rating per EN 1062-7, per DoP)\u003c\/li\u003e\n\u003cli\u003eReaction to fire: Class F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCertificates\u003c\/h3\u003e\n\u003cp\u003eDeclaration of Performance (DoP), issued 2024-04-05, tested to EN 1504-2:2005 (\"Concrete surface protection systems – Coatings\"), notified body Tecnalia Research \u0026amp; Innovation (No. 1292).\u003c\/p\u003e\n\u003ch3\u003eSafety information\u003c\/h3\u003e\n\u003cp\u003e1 kg pack – solvent-based (SB) formula: ensure good ventilation while applying and avoid ignition sources. 5.7 kg pack – solvent-free (SF), lower hazard. Follow the safety data sheet (chemical-resistant gloves, eye and respiratory protection recommended).\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Grey \/ 1 kg","offer_id":52565851504974,"sku":"HDR-AMZ-MS-SB-1GR","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Grey \/ 5.7 kg","offer_id":60766295523662,"sku":"HDR-AMZ-MS-SF-1GAL-GR","price":81.99,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 1 kg","offer_id":60766295556430,"sku":"HDR-AMZ-MS-SB-1BLACK","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 5.7 kg","offer_id":60766295589198,"sku":"HDR-AMZ-MS-SF-1GAL-BLACK","price":81.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/5714\/1326\/files\/1_02568e1d-dc9b-4232-a281-ccb75f6d8a5a.jpg?v=1789459138","url":"https:\/\/panda-coat.com\/products\/universal-waterproofing-unibase-ms-sf","provider":"Pandacoat","version":"1.0","type":"link"}